Clique Kits

Click. Connect. Create.

Geek Lab with Hannah

4 Comments

ck-jul17-mainkit_2_orig

Aloha!! It’s Hannah here with you today! Lately I have been loving adding my own brush script to my layouts. It is a fun way to add a bit of me to the layout. It makes the layout seem more homemade and has an unique touch.

Today I am going to be sharing with you how I take my own brush script and making it into a png file so I can add it to the Silhouette Software and add it to an exclusive Clique Kits Cutfile.

At the end of the blog I’ll also have a video tutorial that I put together sharing this same info as well in case you like to see what someone is doing in order to learn. I hope you will save that video in your Youtube info so you can refer to it the next time you want to add a png to a cut file.

Adding your own brush script to a cut file is so easy.  It just takes a few extra steps and a piece of you is injected to your layout.

First, use some card stock or watercolor paper, watercolor paints, and some watercolor brushes. I prefer to use black watercolor or at least a dark color paint so that it shows up when you can your image. I also like thicker paper because it won’t warp also allowing for a crisper and cleaner file when you scan it.

IMG_7546

Brush script out the title or word you want to use. I find in general with brush script, practice makes perfect. Also know that it is not going to be perfect and that is generally the look I am going for. If you want it close to perfect keep trying until you get the look you want.

You will also need a scanner that is connected to your computer. Mine is wireless so I can do everything right from my computer. Scan your image however your system allows you to do. (My scanner will scan if I go into the system preferences and switch the printer to the scan section.) I like to scan at 300 dpi because I will also get a cleaner clearer image. I scan and save my image to a PNG at this point. You can scan and save as a JPG and switch it to a PNG later.

You will need a PNG in order to use it in the Silhouette software.

IMG_7543

I decided to use the Sun exclusive cut file for July. I pull up the Cutfile in my Silhouette software like I normally do when I am going to cut it. I like to open it using the SVG file, because all the cut marks are already added. It’s one less step.

You can open it in a png and then trace it to add the cut lines. Make sure you the High Pass Filter is selected and the value is high enough to get all the intricate cuts of this file.

I also recommend that when you cut this file out you use a nice sharp blade and double cut it. This will ensure that your file be cut right and you don’t have to redo it.

IMG_7540

You will need to pull up the scanned cut file in another window in your silhouette. Select the words or phrase in the software with the trace tool. Select the High Pass Filter up the value until everything you want to cut is in yellow.

If there is any part of the image you don’t want cut this is a good time to select the image and select release compound path. This will separate the lines in the image, allowing you to select and delete certain areas of the image. (I show how to do this in detail on the tutorial, as I had info on the image I didn’t want to cut.)

When all the lines you don’t want to cut are deleted, then reselect the image and select Make Compound Path. This will connect all the words in the phrase so you can move them together.

When this whole image is selected (the phrase or word you brush scripted), Copy it.

Click back on the Exclusive Cutfile from Clique Kits, and paste the brush script into the exclusive file. Adjust the brush script to whatever size you like, inside the middle of the sun.

IMG_7547

All your cut lines should be in red, since you already selected and traced the outlined phrase you are adding.

From here you cut the file as you would any other cut file.  Adjusting the settings according to the paper you are cutting on.

Here is the tutorial video showing you all this info I explained.

I used a piece of patterned paper from the July Pool Party Main Kit, from Bella Blvd. I wanted a fun pop with the cool design.

Close up footer

I kept my layout really simple so that this amazing cut file would shine.

You can watch my process video of this layout below.

 

Here is a look at my finished layout, with some watercolor behind the cut file so it peeks through all the cuts of the file.

You are my sunshine footer final

Thanks for joining me today. I hope you try and share with us how you use the Clique Kits Exclusive Cutfiles!!

CK_DT17-Signatures-Hannah

Author: dandalion2002

I am a scrapbooker, mother, wife and lover of life. I love to document my families adventures in life on pretty paper with cute embellishments.

4 thoughts on “Geek Lab with Hannah

  1. Neat layout! Love all the little details.

    Like

  2. I love the journaling around the diecut.

    Like

  3. That’s pretty cool! Thanks for sharing, Hannah!

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s